CUSTOM RUBBER MATERIALS & MANUFACTURING

Rubber Materials for Custom Seals & Molded Parts

Source custom rubber sealing and molded parts with material support from NEWTOP. We help connect NBR, EPDM, FKM and CR options—and project-reviewed HNBR or SBR compounds—with tooling, sampling, quality requirements and repeat production for your OEM application.

EPDM rubber sealing rings as an example of non-silicone rubber materials
NBR rubber O-ring product exampleNBR
EPDM rubber O-ring product exampleEPDM
FKM rubber O-ring product exampleFKM
CR rubber O-ring product exampleCR
MATERIAL ADVANTAGE

Rubber Material Flexibility, Built Around Your Finished Part

NEWTOP helps turn a rubber material choice into a manufacturable custom component. Rather than offering a polymer name alone, we connect the compound, part design and intended service environment at the beginning of your project.

  • Multiple material directions: established NBR, EPDM, FKM and CR product categories, with HNBR and SBR assessed when your project calls for them.
  • Application-focused properties: hardness, elasticity, compression behavior and resistance requirements considered against the selected grade.
  • Material and tooling together: compound selection reviewed with dimensions, mold feasibility and sample requirements before volume production.
Explore Our Rubber Material Solutions
RUBBER MATERIAL OPTIONS

Rubber Material Options for Your Custom Project

Choose a rubber family based on the part’s job—not a generic specification. Our existing O-ring range includes NBR, EPDM, FKM and CR. HNBR and SBR are additional project-assessment options; grade availability and manufacturing feasibility are confirmed before quotation.

01

NBR

For custom O-rings, gaskets and molded seals exposed to selected mineral oils and lubricants. We review the exact fluid and operating conditions before choosing a grade.

Nitrile Butadiene RubberOil-contact sealsCurrent O-ring range
02

EPDM

For water-system seals, weather-exposed components and outdoor protection parts where ozone and aging behavior matter.

Ethylene Propylene Diene RubberWater & weather exposureCurrent O-ring range
03

FKM

For demanding seals facing selected oils, fuels, heat or chemicals. Compound chemistry and media compatibility require grade-specific confirmation.

FluoroelastomerHeat & selected chemicalsCurrent O-ring range
04

CR

For selected protective boots, covers, outdoor parts and general sealing components requiring a balanced performance profile.

Chloroprene RubberWeathering & protective partsCurrent O-ring range
05

HNBR

For projects where standard NBR may not meet target heat-aging, mechanical or oil-service needs. Assessed for grade sourcing and processing feasibility.

Hydrogenated Nitrile RubberHigher-duty oil environmentsProject assessment
06

SBR

For selected general molded rubber parts where oil resistance is not the main requirement. Availability and application suitability are evaluated per project.

Styrene Butadiene RubberGeneral-purpose elastomerProject assessment
MATERIAL SELECTION SUPPORT

Compare Rubber Options Before Tooling & Quotation

This practical comparison helps shortlist candidate compounds for your O-ring, gasket or protective part. NEWTOP reviews actual media exposure, geometry and requirements with the proposed rubber grade so material selection can support sampling and subsequent production.

Rubber FamilyPrimary Selection FocusTypical Part DirectionImportant Limitation / CheckScope
NBR
Nitrile Butadiene Rubber
Oil-contact sealsOil or hydraulic serviceConfirm exact fluid, temperature and ozone exposure.Current O-ring range
EPDM
Ethylene Propylene Diene Rubber
Water & weather exposureWater systems / outdoor sealingGenerally not the first choice for petroleum oils or fuels.Current O-ring range
FKM
Fluoroelastomer
Heat & selected chemicalsOil / fuel / chemical sealingVerify exact chemical, concentration and low-temperature conditions.Current O-ring range
CR
Chloroprene Rubber
Weathering & protective partsOutdoor / protective sealsChemical resistance depends on the specific compound.Current O-ring range
HNBR
Hydrogenated Nitrile Rubber
Higher-duty oil environmentsSelected demanding fluid systemsCompound sourcing and molding feasibility require confirmation.Project assessment
SBR
Styrene Butadiene Rubber
General-purpose elastomerGeneral molded componentsNot a default oil-sealing choice; grade and supply route need review.Project assessment

Reference only. Service suitability depends on compound formulation, fluid composition and concentration, temperature, pressure, duration, geometry and test criteria. Final grades and certifications require project-specific confirmation.

WHY SOURCE WITH NEWTOP

Material Selection Backed by Custom Manufacturing

Your project needs more than access to a rubber compound. NEWTOP supports the transition from material consideration to custom tooling, sample confirmation, agreed inspection criteria and coordinated repeat orders.

Rubber production floor with molding press line and operating team
01

One Team for Materials & Parts

Discuss material suitability and custom component requirements in the same project, reducing the handoff between material choice and part development.

02

Engineering & Tooling Support

Review fit, wall sections, parting lines and manufacturing feasibility before mold decisions and sample approval.

03

Quality Criteria by Project

Align material specification, dimensional checks, appearance and any required tests with the customer’s application and acceptance standard.

04

Coordinated Repeat Supply

Reference approved samples, mold details, material specifications and packaging requirements to support consistent replenishment.

Have a Rubber Part but Not a Final Material Specification?

NEWTOP can discuss candidate rubber families together with your part structure, working conditions, tooling needs and expected volume—so your next step is a practical quote or sampling review.

Request a Material & Project Review
MANUFACTURING & QUALITY

How NEWTOP Brings Rubber Parts into Production

Once the application and material direction are agreed, our support moves into part feasibility, tooling, sampling and production planning. Each manufacturing method and compound route is assessed for the individual project—not presented as a universal process for every rubber type.

Vulcanizing oven room for rubber compound curing
01 / PROCESS REVIEW

Compound & Cure Review

We coordinate the proposed compound grade, cure behavior and sourcing feasibility before sample trials.

Storage racks for rubber product molds with labeled mold sets
02 / PROCESS REVIEW

Tooling & Sealing Geometry

We assess groove fit, wall thickness, shrinkage, draft and tooling considerations for your part geometry.

Rubber compression molding operation at the press
03 / PROCESS REVIEW

Molding Route Assessment

We check suitable molding methods against the compound, part features and order volume before proceeding.

Vulcanization tester displaying rubber cure curve
04 / PROCESS REVIEW

Samples & Fit Checks

We compare samples against agreed dimensions, hardness, appearance and assembly requirements.

Pneumatic trimming machines for rubber parts finishing
05 / PROCESS REVIEW

Finishing & Packaging

We plan flash removal, part segregation, final checks and packaging around your order requirements.

Sample library aisle with organized rubber product samples
06 / PROCESS REVIEW

Repeat-Order References

We use approved samples and agreed material, mold and QC references to support repeat production.

OUR CUSTOM RUBBER SERVICES

Custom Rubber Parts, Developed Around Your Requirements

From initial part concepts to repeat orders, NEWTOP combines material review with engineering and production coordination. Our service is built around the actual component you need, rather than a fixed rubber-material catalog.

Discuss Your Custom Rubber Project
01
Non-Standard Sealing ShapesO-rings, gaskets and molded sealing geometries designed around the assembly and fit.
02
Compound & Hardness ReviewRubber family and grade assessment for relevant media, resilience, aging and color requirements.
03
Tooling & Prototype SupportTooling evaluation and sample development for new or modified part designs.
04
Performance & Quality PlanningAgreement on relevant dimensions, material checks, test evidence and acceptance criteria.
05
Volume & Repeat OrdersCoordination of trial quantities, production scheduling and repeat order specifications.
06
Packaging & Delivery OptionsPart sorting, identification, packaging and shipment arrangements tailored to your orders.
MATERIAL & PROJECT REVIEW

Build Your Custom Rubber Parts with NEWTOP

Tell us what your part needs to seal, protect or withstand. We can evaluate a suitable rubber material direction together with its tooling and production feasibility, then discuss sampling and quotation for your project.

Request a Custom Rubber Quote
FAQ

FAQs About Custom Rubber Materials & Orders

Answers to common sourcing questions about rubber materials, customization, sampling and repeat manufacturing.

Does this page cover silicone rubber too?
No. Here “rubber materials” refers to non-silicone elastomer families such as NBR, EPDM, FKM, CR, HNBR and SBR. For VMQ, HCR and LSR, visit the separate silicone materials section.
How do I choose between NBR and EPDM?
The contact medium is often the first filter. NBR is commonly reviewed for petroleum-oil service, while EPDM is commonly considered for water and weather exposure. Exact grades must still be checked for temperature, chemicals, pressure and service cycle.
When should FKM or HNBR be evaluated?
FKM can be considered for selected temperature and chemical-exposure requirements; HNBR may be relevant where NBR needs improved aging or mechanical performance. Suitability and supply depend on the specific compound and process.
Do you stock every rubber family shown here?
No blanket stock claim is made. NBR, EPDM, FKM and CR are represented in NEWTOP’s existing O-ring product categories; HNBR and SBR are additional project-assessment directions. Grade availability, minimum quantities and lead times are confirmed before quotation.
Can one rubber grade work with every oil or chemical?
No. “Oil resistant” or “chemical resistant” is not universal compatibility. Fluid identity, concentration, temperature, contact duration and the actual rubber formulation must be reviewed and tested as required.
Can you develop custom rubber O-rings and gaskets?
NEWTOP supports custom seals and gasket projects using drawings or physical samples. The appropriate rubber compound, geometry, mold feasibility, verification plan and supply arrangement are assessed together.
Can you provide fixed hardness and temperature numbers?
A generic range is not a reliable finished-part specification. We recommend confirming hardness and service limits for the selected compound using supplier documentation and relevant test requirements.
What testing is relevant to custom rubber parts?
Depending on the application, agreed verification may include dimensional checks, hardness, tensile properties, compression set, heat aging, fluid immersion or other project-specific methods. Laboratory or third-party test availability is confirmed case by case.
Can the approved compound be maintained for repeat orders?
Repeat orders can be specified against approved material grade, sample, dimensions, quality criteria and packaging. Any material changes should be reviewed and reapproved where the project requires it.